.产品材质:A,C,F:优质加厚型锌合金；B,E:丁腈橡胶；D:铁皮
.产品性能:加厚型锌合金镀锌或镀铬，外形美观，结构紧密，强度高。软管护套设计与软管相扣接紧之设计，装配省时便利，抗拉力强。可防水、防尘、抗盐，耐酸碱、酒精、油、脂及一般溶剂
.防护等级：IP65 .温度范围: -40℃~+100℃ ^+120℃
注：特殊规格需要请联系工厂
金属软管端式接头
订货号 | 适配软管 Conduit | 螺纹规格 | 螺纹规格 | 螺纹规格 | 螺纹长度 | 包 装 |
Part NO. | mm | inch | 公制M | 德制PG | 英制 G | L1(mm) | pcs |
HNDPJ6.0-螺纹规格 | 6.0 | 3/16” | M10/M12/M14 | PG7 | G1/4 | 8.0 | 100 |
HNDPJ8.0-螺纹规格 | 8.0 | 1/4” | M12/M14/M16 | PG9 | G3/8 | 8.0 | 100 |
HNDPJ10.0-螺纹规格 | 10.0 | 5/16” | M16 | PG9 | G3/8 | 8.0 | 100 |
HNDPJ13.0-螺纹规格 | 12.0/13.0 | 3/8” | M18/M20 | PG11/PG13.5 | G3/8 | 8.0 | 100 |
HNDPJ16.0-螺纹规格 | 15.0/16.0 | 1/2” | M20/M22/M24 | PG13.5/PG16 | G1/2 | 11.0 | 100 |
HNDPJ20.0-螺纹规格 | 20.0 | 3/4” | M25/M27/M30 | PG21 | G3/4 | 14.0 | 50 |
HNDPJ25.0-螺纹规格 | 25.0 | 1” | M32/M33/M36 | PG29 | G1 | 15.0 | 50 |
HNDPJ32.0-螺纹规格 | 32.0 | 1 1/4” | M36/M40/M42/M48 | PG29 | G1 1/4 | 15.0 | 25 |
HNDPJ38.0-螺纹规格 | 38.0 | 1 1/2” | M48/M50 | PG36/PG42 | G1 1/2 | 16.0 | 25 |
HNDPJ51.0-螺纹规格 | 51.0 | 2” | M60/M63/M64/M72 | PG48 | G2 | 18.0 | 10 |
HNDPJ64.0-螺纹规格 | 64.0 | 2 1/2” | M76x2.0 | - | G2 1/2 | 22.0 | 10 |
HNDPJ75.0-螺纹规格 | 75.0 | 3” | M88x2.0 | - | G3 | 22.0 | 5 |
HNDPJ100.0-螺纹规格 | 100.0 | 4” | M114x2.0 | - | G4 | 24.0 | 5 |
